GATE CE
GATE Civil Engineering · Structural Analysis - Trusses · 2018-2021
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A column is subjected to a total load (P) of 60 kN supported through a bracket connection, as shown in the figure (not to scale). The resultant force in bolt R (in kN, round off to...
Employ stiffness matrix approach for the simply supported beam as shown in the figure to calculate unknown displacements/rotations. Take length, L = 8 m; modulus of elasticity, E =...
A square plate O-P-Q-R of a linear elastic material with sides 1.0 m is loaded in a state of plane stress. Under a given stress condition, the plate deforms to a new configuration...
A small project has 12 activities – N, P, Q, R, S, T, U, V, W, X, Y, and Z. The relationship among these activities and the duration of these activities are given in the Table. Act...
Consider the deformable pin-jointed truss with loading, geometry and section properties as shown in the figure. Given that E = 2×10¹¹ N/m², A = 10 mm², L = 1 m and P = 1 kN. The ho...
At a construction site, a contractor plans to make an excavation as shown in the figure. The water level in the adjacent river is at an elevation of +20.0 m. Unit weight of water i...
A conventional drained triaxial compression test was conducted on a normally consolidated clay sample under an effective confining pressure of 200 kPa. The deviator stress at failu...