GATE 2013 Production & Industrial
13 questions across 1 session
Circular blanks of $$10mm$$ diameter are punched from an aluminium sheet of $$2$$ $$mm$$ thickness. The shear strength of aluminium is $$80$$ $$MPa.$$ The minimum punching force re...
Water $$\left( {{C_p} = 4.18\,kJ/kg.K} \right)$$ at $${80^ \circ }C$$ enters a counter flow heat exchanger with a mass flow rate of $$0.5kg/s.$$ Air $$\left( {{C_p} = 1\,kJ/kg.\,K}...
In a rolling process, the state of stress of the material undergoing deformation is
A cube shaped casting solidifies in $$5$$ min. The solidification time in min for a cube of the same material, which is $$8$$ times heavier than the original casting, will be
In a $$CAD$$ package, mirror image of a $$2D$$ points $$P(5, 10)$$ is to be obtained about a line which passes through the origin and makes an angle of $${45^ \circ }$$ countercloc...
A steel bar $$200$$ $$mm$$ in diameter is turned at a feed of $$0.25$$ $$mm/rev$$ with a depth of cut of $$4$$ $$mm.$$ The rotational speed of the work piece is $$160$$ $$rpm.$$ Th...
A disc of $$200$$ $$mm$$ outer and $$80$$ $$mm$$ inner diameter is faced at a feed of $$0.1$$ $$mm/rev$$ with a depth of cut of $$1$$ $$mm.$$ The facing operation is undertaken at...
A disc of $$200$$ $$mm$$ outer and $$80$$ $$mm$$ inner diameter is faced at a feed of $$0.1$$ $$mm/rev$$ with a depth of cut of $$1$$ $$mm.$$ The facing operation is undertaken at...
In orthogonal turning of a bar of $$100$$ $$mm$$ diameter with a feed of $$0.25$$ $$min/rev,$$ depth of cut of $$4$$ $$mm$$ and cutting velocity of $$90$$ $$m/min,$$ it is observed...
In orthogonal turning of a bar of $$100$$ $$mm$$ diameter with a feed of $$0.25$$ $$min/rev,$$ depth of cut of $$4$$ $$mm$$ and cutting velocity of $$90$$ $$m/min,$$ it is observed...
Two cutting tools are being compared for a machining operation. The tool life equations are: $$\eqalign{ & \,\,\,\,\,\,\,\,\,\,\,\,Carbi{\mathop{\rm de}\nolimits} \,\,tool:\,\,\,\,...
Details pertaining to an orthogonal metal cutting process are given below. Chip thickness ratio $$0.4$$ Under formed thickness $$0.6mm$$ Rake angle $$ + {10^0}$$ Cutting speed $$2....
Cylindrical pins of $${25^{\matrix{ { + 0.020} \cr { + 0.010} \cr } }}\,\,mm$$ diameter are electroplated in a shop. Thickness of the plating is $$30 \pm 0.2$$ micron. Neglecting g...