Theory of Machines - Gears
GATE Mechanical Engineering · 3 questions across 3 years (2018-2026) · 8% recurrence rate
Recurrence sparkline
2018–2026201820222026
Difficulty mix
easy 33%
med 67%
Question types
MCQ2
NAT1
All 3 questions on Theory of Machines - Gears
2026 Q17
A gear train with five gears is shown in the figure below. The number of teeth on each gear is N1, N2, N3, N4, and N5. The idler gear in this gear train is
Easy✓📊
2023 Q29
Two meshing spur gears 1 and 2 with diametral pitch of 8 teeth per mm and an angular velocity ratio |ω₂|/|ω₁| = 1/4, have their centers 30 mm apart. The number of teeth on the driver (gear 1) is ______. (Answer in intege...
Med📊
2018 Q6
A frictionless gear train is shown in the figure. The leftmost 12-teeth gear is given a torque of 100 N-m. The output torque from the 60-teeth gear on the right in N-m is
Med✓📊