Modern Manufacturing

$$ \text { In relation to additive manufacturing, match the following } $$ Process Layer creation technique Material P. Stereolithography 1. Injection of powder stream I. Paper Q. Fused deposition modeling 2. Extrusion o...

Ceramics and glass are machined by

In computer aided design (CAD), solid models can be constructed using

Which of the following additive manufacturing technique(s) can use a wire as a feedstock material?

Which of these processes involve(s) melting in metallic workpieces?

Match the additive manufacturing technique in Column I with its corresponding input material in Column II. Additive manufacturing technique (Column I) Input Material (Column II) P. Fused deposition modeling 1. Photosensi...

Electrochemical machining operations are performed with tungsten as the tool, and copper and aluminum as two different workpiece materials. Properties of copper and aluminum are given in the table below. $$ \begin{array}...

During the development of a product, an entirely new process plan is made based on design logic, examination of geometry and tolerance information. This type of process planning is known as

For generating coon's surface we require

In a $$2-D$$ $$CAD$$ package, clockwise circular arc of radius, $$5,$$ specified from $${P_1}\left( {15,10} \right)$$ to $${P_2}\left( {10,15} \right)$$ will have its center at

In computer aided drafting practice, an arc is defined by

Deep hole drilling of small diameter, say $$0.2$$ $$mm$$ is done with $$EDM$$ by selecting the tool material as

Generally cylindrical parts produced by powder metallurgy should not have non uniform cross section and a length to diameter ratio exceeding . . . . . . . . . . . . . . .