work output
GATE Mechanical Engineering · Thermodynamics - Cycles · 1993-2025
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A thermodynamically closed system contains 1 kg of hydrogen. The system undergoes a reversible polytropic process with polytropic index 1.3. The work output during the process is 4...
An air standard Otto cycle has thermal efficiency of 0.5 and the mean effective pressure of the cycle is 1000 kPa. For air, assume specific heat ratio γ = 1.4 and specific gas cons...
An engine operates on the reversible cycle as shown in the figure. The work output from the engine (in kJ/cycle) is ________ (correct to two decimal places).
Steam enters a well insulated turbine and expands isentropically throughout. At an intermediate pressure, $$20$$ percent of the mass is extracted for process heating and the remain...
Steam enters a turbine at $$30bar,$$ $${300^ \circ }C$$ $$\left( {u = 2750\,\,kJ/kg,\,\,h = 2993\,\,kJ/kg} \right)$$ and exits the turbine as saturated liquid at $$15$$ $$kPa$$ $$\...
An irreversible heat engine extracts heat from a high temperature source at a rate of $$100kW$$ and rejects heat to a sink at a rate of $$50kW.$$ The entire work output of the heat...
In a single stage single row impulse turbine, the steam is entering at a velocity of $$1200$$ $$m/s$$ with a nozzle angle of $${20^ \circ }$$ and leaving the blade in the axial dir...