viscosity
GATE Mechanical Engineering · Fluid Properties · 1995-2024
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A liquid fills a horizontal capillary tube whose one end is dipped in a large pool of the liquid. Experiments show that the distance L travelled by the liquid meniscus inside the c...
A liquid fills a horizontal capillary tube whose one end is dipped in a large pool of the liquid. Experiments show that the distance $L$ travelled by the liquid meniscus inside the...
A solid block of 2.0 kg mass slides steadily at a velocity V along a vertical wall as shown in the figure below. A thin oil film of thickness h = 0.15 mm provides lubrication betwe...
Consider fluid flow between two infinite horizontal plates which are parallel (the gap between them being $$50$$ $$mm$$). The top plate is sliding parallel to the stationary bottom...
Water flows through a pipe having an inner radius of $$10$$ $$mm$$ at the rate of $$36$$ $$kg/hr$$ at $${25^ \circ }C$$. The viscosity of water at $${25^ \circ }C$$ is $$0.001$$ $$...
In a simple concentric shaft-bearing arrangement, the lubricant flows in the $$2$$ $$mm$$ gap between the shaft and the bearing. The flow may be assumed to be a plane Couette flow...
A journal bearing has a shaft diameter of $$40$$ $$mm$$ and a length of $$40mm.$$ The shaft is rotating at $$20$$ $$rad/s$$ and the viscosity of the lubricant is $$20$$ $$mPa$$-$$s...
Newton's law of viscosity states that the shear stress in a fluid is proportional to :
The velocity profile in fully developed laminar flow in a pipe of diameter $$D$$ is given by $$u = {u_0}\left( {1 - 4{r^2}/{D^2}} \right),$$ where $$r$$ is the radial distance from...
To restore stable operating condition in a hydrodynamic journal bearing, when it encounters higher magnitude loads.
A fluid is said to be Newtonian fluid when the shear stress is