thrust force

An orthogonal cutting operation is being carried out in which uncut thickness is 0.010 mm, cutting speed is 130 m/min, rake angle is 15° and width of cut is 6 mm. It is observed th...

In an orthogonal cutting process the tool used has rake angle of zero degree. The measured cutting force and thrust force are $$500$$ $$N$$ and $$250$$ $$N,$$ respectively. The coe...

Orthogonal turning is performed on a cylindrical work piece with shear strength of $$250Mpa.$$ The following conditions are used: cutting velocity is $$180m/min,$$ feed is $$0.2mm/...

In an orthogonal cutting test on mild steel, the following data were obtained Cutting speed: $$40$$ $$m/min,$$ Depth of cut: $$0.3$$ $$mm,$$ Tool rake angle : $$ + {5^ \circ },$$ C...