taylor tool life

If the Taylor's tool life exponent $$n$$ is $$0.2,$$ and the tool changing time is $$1.5$$ $$min,$$ then the tool life (in min) for maximum production rate is ____________

Two cutting tools are being compared for a machining operation. The tool life equations are: $$\eqalign{ & \,\,\,\,\,\,\,\,\,\,\,\,Carbi{\mathop{\rm de}\nolimits} \,\,tool:\,\,\,\,...

A low carbon steel bar of $$147$$ $$mm$$ diameter with length of $$630$$ $$mm$$ is being turned with uncoated carbide insert. The observed tool lives are $$24$$ and $$12$$ for cutt...

A low carbon steel bar of $$147$$ $$mm$$ diameter with length of $$630$$ $$mm$$ is being turned with uncoated carbide insert. The observed tool lives are $$24$$ and $$12$$ for cutt...

A batch of $$10$$ cutting tools could produce $$500$$ components while working at $$50$$ $$rpm$$ with a tool feed of $$0.25$$ $$mm/rev$$ and depth of cut of $$1$$ $$mm.$$ A similar...

The lives of two tools $$A$$ & $$B$$, governed by the equation $$V{T^{0.125}} = 2.5$$ and $$V{T^{0.25}} = 7$$ respectively in certain machining operation where $$V$$ is the cutting...

A single point cutting tool made of $$HSS$$ has the value of constant $$'C'$$ $$80,$$ and $$n=0.2$$ in the basic tool life equation. If the tool cost per regrind is Rs $$2$$ and th...