taylor's tool life equation

During the turning of a $$20$$ $$mm-$$diameter steel bar at a spindle speed of $$400$$ $$rpm,$$ a tool life of $$20$$ minute is obtained. When the same bar is turned at $$200$$ $$r...

Under certain cutting conditions, doubling the cutting speed reduces the tool life to $${\left( {{1 \over {16}}} \right)^{th}}$$ of the original. Taylor’s tool life index $$(n)$$ f...

For tool $$A,$$ Taylor’s tool life exponent $$(n)$$ is $$0.45$$ and constant $$(K)$$ is $$90.$$ Similarly for tool $$B,$$ $$n=0.3$$ and $$K=60.$$ The cutting speed (in $$m/min$$) a...

In a machining operation, doubling the cutting speed reduces the tool life to $$1/{8^{th}}$$ of the original value. The exponent $$n$$ in Taylor's tool life equation $$V{T^n} = C,$...

For turning $$NiCr$$ alloy steel at cutting speeds of $$64m/min$$ and $$100m/min,$$ the respective tool lives are $$15min$$ and $$12$$ $$min.$$ The tool life for a cutting speed of...

Tool life of a $$10$$ hours is obtained when cutting with a single point tool at $$63m/min.$$ If Taylor's constant $$C=257.35,$$ tool life on doubling the velocity will be

Find the percentage change in cutting speed required to give a $$50\% $$ reduction in tool life (that is required tool life is half of the original tool life ) when the value of th...