stiffness
GATE Mechanical Engineering · Vibrations - Forced Vibration · 2015-2023
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →The effective stiffness of a cantilever beam of length L and flexural rigidity EI subjected to a transverse tip load W is
A machine of mass 100 kg is subjected to an external harmonic force with a frequency of 40 rad/s. The designer decides to mount the machine on an isolator to reduce the force trans...
Pre-tensioning of a bolted joint is used to
A hollow circular shaft of inner radius 10 mm, outer radius 20 mm and length 1 m is to be used as a torsional spring. If the shear modulus of the material of the shaft is 150 GPa,...
A machine of mass m = 200 kg is supported on two mounts, each of stiffness k = 10 kN/m. The machine is subjected to an external force (in N) F(t) = 50 cos 5t. Assuming only vertica...
The spring constant of a helical compression spring DOES NOT depend on
A precision instrument package (m = 1kg) needs to be mounted on a surface vibrating at 60 Hz. It is desired that only 5% of the base surface vibration amplitude be transmitted to t...