simply supported beam
GATE Mechanical Engineering · Strength of Materials - Bending Stress · 1989-2018
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A simply supported beam of width 100 mm, height 200 mm and length 4 m is carrying a uniformly distributed load of intensity 10 kN/m. The maximum bending stress (in MPa) in the beam...
Consider a simply supported beam of length $$50$$h, with a rectangular cross-section of depth h, and width $$2$$h. The beam carries a vertical point load P, at its mid-point. The r...
A simply supported beam of length $$L$$ is subjected to a varying distributed load $$\sin \left( {3\pi x/L} \right)N{m^{ - 1}},$$ where the distance $$x$$ is measured from the left...
A simply supported beam of span length $$6$$m and $$75$$ mm diameter carries a udl of $$1.5$$ kN/m What is the maximum value of bending stress?
A simply supported beam of span length $$6$$m and $$75$$ mm diameter carries a udl of $$1.5$$ kN/m What is the maximum value of bending moment?
A concentrated load $$P$$ acts on a simply supported beam of span $$L$$ at a distance $${L \over 3}$$ from the left support. The bending moment at the point of application of the l...
For a simply supporting beam on two end supports the Bending Moment is maximum: