metal cutting

In an ideal orthogonal cutting experiment (see figure), the cutting speed V is 1 m/s, the rake angle of the tool α = 5°, and the shear angle, φ, is known to be 45°. Applying the id...

$$BUE$$ is formed while machining

A built up edge is formed while machining

In a typical metal cutting operation, using a cutting tool of positive rake $$\gamma = 10\deg ,$$ it was observed that the shear angle was $$20deg$$. The friction angle is

Most of the metal cutting heat goes into the

Most of the metal cutting heat goes into the

The size of $$BLUE$$ in metal cutting increases with