mechanical engineering
GATE Mechanical Engineering · Theory of Machines - Gears · 2023-2026
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A gear train with five gears is shown in the figure below. The number of teeth on each gear is N1, N2, N3, N4, and N5. The idler gear in this gear train is
Match the mold elements in the casting process with the most suitable function Mold element P Blind riser Q Chill R Skim bob S Core T Insulating sleeve U Inoculant Function I Casti...
A linear spring-mass-dashpot system with a mass of 2 kg is set in motion with viscous damping. If the natural frequency is 15 Hz, and the amplitudes of two successive cycles measur...
The figure shows a thin cylindrical pressure vessel constructed by welding plates together along a line that makes an angle $\alpha = 60^{\circ}$ with the horizontal. The closed ve...
The figure shows a block of mass m = 20 kg attached to a pair of identical linear springs, each having a spring constant k = 1000 N/m. The block oscillates on a frictionless horizo...
A cylindrical rod of length h and diameter d is placed inside a cubic enclosure of side length L. S denotes the inner surface of the cube. The view-factor Fs-s is