material removal rate

Electrochemical machining operations are performed with tungsten as the tool, and copper and aluminum as two different workpiece materials. Properties of copper and aluminum are gi...

A 1 mm thick cylindrical tube, 100 mm in diameter, is orthogonally turned such that the entire wall thickness of the tube is cut in a single pass. The axial feed of the tool is 1 m...

In a grinding operation of a metal, specific energy consumption is 15 J/mm³. If a grinding wheel with a diameter of 200 mm is rotating at 3000 rpm to obtain a material removal rate...

A circular hole of 25 mm diameter and depth of 20 mm is machined by EDM process. The material removal rate (in mm³/min) is expressed as $4 \times 10^4 IT^{-1.23}$, where I = 300 A...

An electrochemical machining (ECM) is to be used to cut a through hole into a 12 mm thick aluminum plate. The hole has a rectangular cross-section, 10 mm x 30 mm. The ECM operation...

A cast iron block of $$200$$ $$mm$$ length is being shaped in a shaping machine with a depth of cut of $$4$$ $$mm,$$ feed of $$0.25$$ $$mm/stroke$$ and the tool principal cutting e...

A steel bar $$200$$ $$mm$$ in diameter is turned at a feed of $$0.25$$ $$mm/rev$$ with a depth of cut of $$4$$ $$mm.$$ The rotational speed of the work piece is $$160$$ $$rpm.$$ Th...

Calculate the $$MRR$$ and Specific cutting pressure for the following cutting conditions Work material : steel, Tool material : $$HSS,$$ Depth of cut : $$1.6mm,$$ Feed : $$0.8mm/re...