heat loss

In an arc welding process, the voltage and current are 30 V and 200 A, respectively. The cross-sectional area of the joint is 20 mm² and the welding speed is 5 mm/s. The heat requi...

The heat loss from a fin is 6 W. The effectiveness and efficiency of the fin are 3 and 0.75, respectively. The heat loss (in W) from the fin, keeping the entire fin surface at base...

A $$10$$ $$mm$$ diameter electrical conductor is covered by an insulation of $$2$$ $$mm$$ thickness. The conductivity of the insulation is $$0.08$$ $$W/m$$-$$K$$ and the convection...

A pipe of $$25$$ $$mm$$ outer diameter carries steam. The heat transfer coefficient between the cylinder and surrounding is $$5$$ $$W/{m^2}K.$$ It is propsed to reduce the heat los...

A fin has $$5mm$$ diameter and $$100mm$$ length. The thermal conductivity of fin material is $$400W/m K.$$ One end of the fin is maintained at $${130^ \circ }C$$ and its remaining...

A copper tube of $$20$$ $$mm$$ outer diameter, $$1$$ $$mm$$ thickness and $$20$$ $$m$$ long (Thermal conducti-vity$$ = 400$$ $$W/mK$$) is carrying saturated steam at $${150^ \circ...

Stream at $$300$$ $$kPa$$ and $${500^ \circ }C\,\,\left( {h = 3486.0\,\,kJ/kg} \right)$$ enters a steam turbine and exits at atmospheric pressure and $${350^ \circ }C\,\,\left( {h...