gear train
GATE Mechanical Engineering · Theory of Machines - Gears · 1989-2026
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A gear train with five gears is shown in the figure below. The number of teeth on each gear is N1, N2, N3, N4, and N5. The idler gear in this gear train is
The Levai type-A train illustrated in the figure has gears with module m = 8 mm/tooth. Gears 2 and 3 have 19 and 24 teeth respectively. Gear 2 is fixed and internal gear 4 rotates...
A power transmission mechanism consists of a belt drive and a gear train as shown in the figure. Diameters of pulleys of belt drive and number of teeth (T) on the gears 2 to 7 are...
A frictionless gear train is shown in the figure. The leftmost 12-teeth gear is given a torque of 100 N-m. The output torque from the 60-teeth gear on the right in N-m is
A gear train shown in the figure consists of gears P, Q, R and S. Gear Q and gear R are mounted on the same shaft. All the gears are mounted on parallel shafts and the number of te...
The overall gear ratio in a 2 stage speed reduction gear box (with all spur gears) is 12. The input and output shafts of the gear box are collinear. The countershafts which is para...
The overall gear ratio in a 2 stage speed reduction gear box (with all spur gears) is 12. The input and output shafts of the gear box are collinear. The countershafts which is para...
In order to test the efficiency of reducer gear train $$1kW$$ input was given at the input end at a speed of $$1440$$ $$rpm$$ and at the output end the measured torque was $$56.36$...