francis turbine
GATE Mechanical Engineering · Fluid Mechanics - Hydraulic Machines (Turbines) · 2004-2021
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A vertical shaft Francis turbine rotates at 300 rpm. The available head at the inlet to the turbine is 200 m. The tip speed of the rotor is 40 m/s. Water leaves the runner of the t...
A test is conducted on a one-fifth scale model of a Francis turbine under a head of 2 m and volumetric flow rate of 1 m³/s at 450 rpm. Take the water density and the acceleration d...
The inlet angle of runner blades of a Francis turbine is $${90^0}.$$ The blades are so shaped that the tangential component of velocity at blade outlet is zero. The flow velocity r...
At a hydro electric power plant site, available head and flow rate are $$24.5$$ $$m$$ and $$10.1{m^3}/s$$ respectively. If the turbine to be installed is required to run at $$4.0$$...