flywheel
GATE Mechanical Engineering · Theory of Machines · 1998-2024
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →The change in kinetic energy ΔE of an engine is 300 J, and minimum and maximum shaft speeds are ω_min = 220 rad/s and ω_max = 280 rad/s, respectively. Assume that the torque-time f...
The change in kinetic energy $\Delta E$ of an engine is $300$ J, and minimum and maximum shaft speeds are $\omega_{min} = 220$ rad/s and $\omega_{max} = 280$ rad/s, respectively. A...
The torque provided by an engine is given by T(θ) = 12000 + 2500 sin(2θ) N.m, where θ is the angle turned by the crank from inner dead center. The mean speed of the engine is 200 r...
For the same material and the mass, which of the following configurations of flywheel will have maximum mass moment of inertia about the axis of rotation $$OO’$$ passing through th...
Maximum fluctuation of kinetic energy in an engine has been calculated to be $$2600$$ J. Assuming that the engine runs at an average speed of $$200$$ rpm, the polar mass moment of...
Consider a flywheel whose mass $$M$$ is distributed almost equally between a heavy, ring-like rim of radius $$R$$ and a concentric disk-like feature of radius $$R/2$$. Other parts...
A flywheel connected to a punching machine has to supply energy of $$400$$ Nm while running at a mean angular speed of $$20$$ rad/s. If the total fluctuation of speed is not to exc...
A circular solid disc of uniform thickness $$20mm,$$ radius $$200mm$$ and $$mass$$ $$20kg,$$ is used as a fly wheel. If it rotates at $$600$$ $$rpm,$$ the kinetic energy of the fly...
The speed of an engine varies from $$210$$ rad/s to $$190$$ rad/s. During cycle the change in kinetic energy is found to be $$400$$ Nm. The inertia of the flywheel in kgm 2 is
If $${C_f}$$ is the coefficient of speed fluctuation of a flywheel then the ratio of $${\omega _{\max }}/{\omega _{\min }}$$ will be
For a certain engine having an average speed of $$1200$$ rpm, a flywheel approximated as a solid disc, is required for keeping the fluctuation of speed within $$2$$% about the aver...
Which of the following statement is correct?
A flywheel of moment of inertia $$9.8$$ kg m 2 fluctuates by $$30$$ rpm for a fluctuation in energy of $$1936$$ Jouls. The mean speed of the flywheel is (in rpm)