flexural rigidity
GATE Mechanical Engineering · Strength of Materials - Deflection of Beams · 2003-2023
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →The effective stiffness of a cantilever beam of length L and flexural rigidity EI subjected to a transverse tip load W is
A cantilever beam of length, L, and flexural rigidity, EI, is subjected to an end moment, M, as shown in the figure. The deflection of the beam at x = L/2 is
A plane frame PQR (fixed at P and free at R) is shown in the figure. Both members (PQ and QR) have length, L, and flexural rigidity, EI. Neglecting the effect of axial stress and t...
A cantilever beam with a uniform flexural rigidity (EI = 200 x 10⁶ N.m²) is loaded with a concentrated force at its free end. The area of the bending moment diagram corresponding t...
A horizontal cantilever beam of circular cross-section, length 1.0 m and flexural rigidity EI = 200 N·m² is subjected to an applied moment MA = 1.0 N·m at the free end as shown in...
A cantilever beam of length, $$L,$$ with uniform cross-section and flexural rigidity $$ EI,$$ is loaded uniformly by a vertical load, $$w$$ per unit length. The maximum vertical de...
Consider a cantilever beam, having negligible mass and uniform flexural rigidity, with length $$0.01m$$. The frequency of vibration of the beam, with a $$0.5$$ kg mass attached at...
A simply supported laterally loaded beam was found to deflect more than a specified value. Which of the following measures will reduce the deflection?