dynamics
GATE Mechanical Engineering · Dynamics / Engineering Mechanics · 2009-2024
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A ram in the form of a rectangular body of size l = 9 m and b = 2 m is suspended by two parallel ropes of lengths 7 m. Assume the center-of-mass of the body is at its geometric cen...
A spherical ball weighing 2 kg is dropped from a height of 4.9 m onto an immovable rigid block as shown in the figure. If the collision is perfectly elastic, what is the momentum v...
Consider a two degree of freedom system as shown in the figure, where PQ is a rigid uniform rod of length, b and mass, m. Assume that the spring deflects only horizontally and forc...
The wheels and axle system lying on a rough surface is shown in the figure. Each wheel has diameter 0.8 m and mass 1 kg. Assume that the mass of the wheel is concentrated at rim an...
A car having weight W is moving in the direction as shown in the figure. The center of gravity (CG) of the car is located at height h from the ground, midway between the front and...
A slender uniform rigid bar of mass m is hinged at O and supported by two springs, with stiffnesses 3k and k, and a damper with damping coefficient c, as shown in the figure. For t...
A uniform disc with radius r and a mass of m kg is mounted centrally on a horizontal axle of negligible mass and length of 1.5r. The disc spins counter-clockwise about the axle wit...
A force of 100 N is applied to the centre of a circular disc, of mass 10 kg and radius 1 m, resting on a floor as shown in the figure. If the disc rolls without slipping on the flo...
Block P of mass 2 kg slides down the surface and has a speed 20 m/s at the lowest point, Q, where the local radius of curvature is 2 m as shown in the figure. Assuming g = 10 m/s²,...
Match the approaches given below to perform stated kinematics/dynamics analysis of machine Analysis $$P.$$ Continuous relative rotation $$Q.$$ Velocity and acceleration $$R.$$ Mobi...