deflection
GATE Mechanical Engineering · Strength of Materials - Deflection of Beams · 2005-2021
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A cantilever beam of length, L, and flexural rigidity, EI, is subjected to an end moment, M, as shown in the figure. The deflection of the beam at x = L/2 is
A right solid circular cone standing on its base on a horizontal surface is of height H and base radius R. The cone is made of a material with specific weight w and elastic modulus...
A prismatic, straight, elastic, cantilever beam is subjected to a linearly distributed transverse load as shown below. If the beam length is L, Young's modulus E, and area moment o...
The deflection of a spring with 20 active turns under a load of 1000 N is 10 mm. The spring is made into two pieces each of 10 active coils and placed in parallel under the same lo...
A weighing machine consists of a 2 kg pan resting on a spring in this condition, with the pan resting on the spring, the length of the spring is 200 mm. When a mass of 20 kg is pla...