chip thickness

In an orthogonal machining with a single point cutting tool of rake angle 10°, the uncut chip thickness and the chip thickness are 0.125 mm and 0.22 mm, respectively. Using Merchan...

Following data correspond to an orthogonal turning of a 100 mm diameter rod on a lathe. Rake angle: +15°; Uncut chip thickness: 0.5 mm; nominal chip thickness after the cut: 1.25 m...

Which pair of following statement is correct for orthogonal cutting using a single-point cutting tool? $$P.$$ reduction in friction angle increases cutting force $$Q.$$ Reduction i...

A cylinder is turned on a lathe with orthogonal machining principle. Spindle rotates at $$200rpm$$. The axial feed rate is $$0.25$$ $$mm$$ per revolution. Depth of cut is $$0.4mm.$...

In a turning trail using orthogonal tool geometry, a chip length of $$84mm$$ was obtained for an uncut chip length of $$200mm.$$ The cutting conditions were $$V=30m/min,$$ $${t_1}...