bite angle

In a slab rolling operation, the maximum thickness reduction $$\left( {\Delta {h_{\max }}} \right)$$ is given by $$\Delta {h_{\max }} = {\mu ^2}R,$$ where $$R$$ is the radius of th...

The thickness of metallic sheet is reduced from an initial value of $$16mm$$ to a final value of $$10mm$$ in one single pass rolling with a pair of cylindrical rollers each of diam...

A strip with sectional area $$150mm\,\, \times \,\,4.5mm$$ is being rolled with $$20\% $$ reduction of area using $$450mm$$ diameter rollers. The angle subtended by the deformation...

Calculate the bite angle when rolling plates $$12mm$$ thick using work rolls $$600mm$$ diameter and reducing the thickness by $$3mm$$