Inverters
GATE Electrical Engineering · 13 questions across 11 years (1995-2025) · 28% recurrence rate
Recurrence sparkline
1995–2025Difficulty mix
Question types
All 13 questions on Inverters
The 3-phase modulating waveforms $\left(v_a(t), v_b(t), v_c(t)\right)$, used in sinusoidal PWM in a voltage source inverter (VSI) are $$ \begin{aligned} & v_a(t)=0.8 \sin (\omega t) \vee \\ & v_b(t)=0.8 \sin \left(\omega...
A single-phase full bridge voltage source inverter (VSI) feeds a purely inductive load. The inverter output voltage is a square wave in 180° conduction mode. The fundamental frequency of the output voltage is 50 Hz. If t...
A 3-phase grid-connected voltage source converter with DC link voltage of 1000 V is switched using sinusoidal Pulse Width Modulation (PWM) technique. If the rid phase current is 10 A and the 3-phase complex power supplie...
A three-phase voltage source inverter with ideal devices operating in $${180^ \circ }$$ conduction mode is feeding a balanced star-connected resistive load. The $$DC$$ voltage input is $${V_{dc}}.$$ The peak of the funda...
A $$3$$ - phase voltage source Inverter is operated in $${180^ \circ }$$ conduction mode. Which one of the following statements is true?
''Six $$MOSFETS$$ connected in a bridge configuration (having no other power device) MUST be operated as Voltage Source Inverter $$(VSI)''.$$ This statement is
A single - phase voltage source inverter is controlled in a single pulse - width modulated mode with a pulse width of $${150^0}$$ in each half cycle. Total harmonic distortion is defined as $$THD = {{\sqrt {V_{rms}^2 - V...
The output voltage waveform of a three - phase square-wave inverter contains
A three phase voltage source inverter supplies a purely inductive three phase load. Upon Fourier analysis, the output voltage waveform is found to have an $${h^{th}}$$ order harmonic of magnitude α h times that of the fu...
Triangular $$PWM$$ control, when applied to a $$BJT$$ based three phase voltage source inverter, introduces.
A $$PWM$$ switching scheme is used with a three phase inverter to
A single - phase bridge inverter is fed from a $$200V$$ $$d.c$$ supply and is operated at $$50$$ $$Hz.$$ It is connected to a load having a resistance of $$20$$ $$ohms$$ and an inductance of $$0.2.$$ $$H.$$ Draw the load...
A single phase Inverter with square wave output voltage will have in its output waveform a fifth harmonic component equal to ______ percentage of the fundamental