Voltmeter
GATE Electrical Engineering · Electrical Measurements - Voltmeter · 1992-2025
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →In an experiment to measure the active power drawn by a single-phase RL Load connected to an AC source through a 2 Ω resistor, three voltmeters are connected as shown in the figure...
Instruments required to synchronize an alternator to the grid is/are
A moving coil instrument having a resistance of 10 Ω, gives a full-scale deflection when the current is 10 mA. What should be the value of the series resistance, so that it can be...
A dc voltage with ripple is given by $$v\left( t \right)\,\,\,\, = \,\,\,\,\left[ {100 + 10\sin \left( {\omega t} \right) - 5\sin \left( {3\omega t} \right)} \right]$$ volts. Measu...
A periodic waveform observed across a load is represented by $$$V\left( t \right) = \left\{ {\matrix{ {1 + \sin \,\omega t} & {0 \le \omega t < 6\pi } \cr { - 1 + \sin \,\omega t}...
Two $$100$$ $$\mu A$$ full scale $$PMMC$$ meters are employed to construct a $$10$$ $$V$$ and a $$100$$ $$V$$ full scale voltmeter. These meters will have figures of merit (sensiti...
A d.c. voltmeter has a sensitivity of $$1000$$$$\Omega /volt.$$ When it measures half full scale in $$100$$ $$V$$ range, the current through the voltmeter is
The scale of a voltmeter is uniform. Its type is
Two $$100V$$ full scale $$PMMC$$ type D.C voltmeter having figure of merits ($$FOM)$$ of $$10k\Omega /V$$ and $$20k\Omega /V$$ are connected in series. The series combination can b...
An unshielded moving iron voltmeter is used to measure the voltage in an a.c. circuit. If a stray d.c. magnetic field having a component along the axis of the meter coil appears, t...