slip
GATE Electrical Engineering · Electrical Machines - Induction Generator · 1998-2024
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A three phase, 50 Hz, 6 pole induction motor runs at 960 rpm. The stator copper loss, core loss, and the rotational loss of the motor can be neglected. The percentage efficiency of...
The following columns present various modes of induction machine operation and the ranges of slip A Mode of operation a. Running in generator mode b. Running in motor mode c. Plugg...
The following columns present various modes of induction machine operation and the ranges of slip A B Mode of operation Range of Slip a. Running in generator mode p) From 0.0 to 1....
A 10-pole, 50 Hz, 240 V, single phase induction motor runs at 540 RPM while driving rated load. The frequency of induced rotor currents due to backward field is
The frequencies of the stator and rotor currents flowing in the three-phase 8-pole induction motor are 40 Hz and 1 Hz, respectively. The motor speed, in rpm, is ________. (round of...
The power input to a $500 \mathrm{~V}, 50 \mathrm{~Hz}, 6$ pole, 3 phase induction motor running at 975 rpm is 40 kW . The stator losses are 1 kW . If the total friction and windag...
An 8 pole, $50 \mathrm{~Hz}, 3$ phase, slip-ring induction motor has an effective rotor resistance of $0.08 \Omega$ per phase. Its speed at maximum torque is 650 rpm . The addition...
A 4 pole induction machine is working as an induction generator. The generator supply frequency is 60 Hz. The rotor current frequency is 5 Hz. The mechanical speed of the rotor in...
A 3-phase, 4-pole, 400 V, 50 Hz squirrel-cage induction motor is operating at a slip of 0.02. The speed of the rotor flux in mechanical rad/sec, sensed by a stationary observer, is...
A 4 pole induction machine is working as an induction generator. The generator supply frequency is 60 Hz. The rotor current frequency is 5 Hz. The mechanical speed of the rotor in...
A 3-phase 50 Hz square wave (6-step) VSI feeds a 3-phase, 4 pole induction motor. The VSI line voltage has a dominant 5 th harmonic component. If the operating slip of the motor wi...
An 8-pole, 3-phase, 50 Hz induction motor is operating at a speed of 700 rpm. The frequency of the rotor current of the motor in Hz is ________.
A three-phase, 4-pole, self excited induction generator is feeding power to a load at a frequency $$f_1$$. If the load is partially removed, the frequency becomes $$f_2$$. If the s...
A 3 phase, 50 Hz, 6 pole induction motor has a rotor resistance of 0.1 Ω and reactance of 0.92 Ω. Neglect the voltage drop in stator and assume that the rotor resistance is constan...
A 4-pole induction motor, supplied by a slightly unbalanced three-phase 50Hz source, is rotating at 1440 rpm. The electrical frequency in Hz of the induced negative sequence curren...
The slip of an induction motor normally does not depend on
A three-phase 440V, 6 pole, 50Hz, squirrel cage induction motor is running at a slip of 5%. The speed of stator magnetic field to rotor magnetic field and speed of rotor with respe...
A three-phase squirrel cage induction motor has a starting torque of $$150\% $$ and a maximum torque of $$300\% $$ with respect to rated torque at rated voltage and rated frequency...
A three phase squirrel cage induction motor has a starting current of seven times the full load current and full load slip of $$5\% $$ If an auto-transformer is used for reduced vo...
A three phase squirrel cage induction motor has a starting current of seven times the full load current and full load slip of $$5\% $$ If a starting torque of $$0.5$$ per unit is r...
For an induction motor, operating at a slip 's', the ratio of gross power output to air gap power is equal to:
A three-phase cage induction motor is started by direct-on-line (DOL) switching at the rated voltage. If the starting current drawn is 6 times the full load current, and the full l...
A 400 V, 15 kW, 4 pole, 50 Hz, Y-connected induction motor has full load slip of 4%. The output torque of the machine at full load is
The power input to a 415 V, 50 Hz, 6 pole, 3-phase induction motor running at 975 rpm is 40 kW. The stator losses are 1kW and friction and windage losses total 2 kW. The efficiency...
A 3-phase squirrel cage induction motor has a full load efficiency of 0.8 and a maximum efficiency of 0.9. It is operated at a slip of 0.6 by applying a reduced voltage. The effici...