resistive load

A single-phase full-bridge diode rectifier feeds a resistive load of 50 $$\Omega$$ from a 200 V, 50 Hz single phase AC supply. If the diodes are ideal, then the active power, in wa...

A 3-phase voltage source inverter is supplied from a 600V DC source as shown in the figure below. For a star connected resistive load of $20 \Omega$ per phase, the load power for 1...

A non-ideal voltage source V S has an internal impedance of Z S . If a purely resistive load is to be chosen that maximizes the power transferred to the load, its value must be

A source $$v_s\left(t\right)=V\cos100\mathrm{πt}$$ has an internal impedance of (4 + j3) Ω.If a purely resistive load connected to this source has to extract the maximum power out...

The core flux of a practical transformer with a resistive load

A 10 kVA, 400 V/200 V, single phase transformer with a percentage resistance of 3% and percentage reactance of 6% is supplying a current of 50 A to a resistive load. The value of t...

A water boiler at home is switched on to the $$A.C$$ mains supplying power at $$230$$ $$V/50$$ $$Hz.$$ The frequency of instantaneous power consumed by the boiler is