Resistance
GATE Electrical Engineering · Circuit Theory - Quality Factor · 1994-2026
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →The resistance values of the Wheatstone bridge shown are: P = 2000 Ω, Q = 500 Ω, R = 3000 Ω. The battery voltage E = 50V. The battery has an internal resistance of 1 Ω and the Galv...
A coil of inductance 100 mH and series resistance 100 Ω is connected across a 20 V, 1 kHz supply. The quality factor of the coil at 1 kHz is
In the Wheatstone bridge shown below, the sensitivity of the bridge in terms of change in balancing voltage E for unit change in the resistance R, in mV/Ω, is ____________ (round o...
In the Wheatstone bridge shown below, the sensitivity of the bridge in terms of change in balancing voltage E for unit change in the resistance R, in mV/Ω, is ________ (round off t...
A 0-1 Ampere moving iron ammeter has an internal resistance of 50 mΩ and inductance of 0.1 mH. A shunt coil is connected to extend its range to 0-10 Ampere for all operating freque...
An incandescent lamp is marked 40W, 240V. If resistance at room temperature $$\left(26^\circ\mathrm C\right)\;\mathrm{is}\;120\mathrm\Omega$$ and temperature coefficient of resista...
How many 200 W/200 V incandescent lamps connected in series would consume the same total power as a single 100 W/200 V incandescent lamp?
Two incandescent light bulbs of $$40$$ $$W$$ and $$60$$ $$W$$ rating are connected in series across the mains. Then
The increase in resistance due to non-uniform distribution of current in a conducto $$r$$ is known as _______effect