real power

The input voltage $v(t)$ and current $i(t)$ of a converter are given by, $v(t)=300 \sin (\omega t) \mathrm{V}$ $$ i(t)=10 \sin \left(\omega t-\frac{\pi}{6}\right)+2 \sin \left(3 \o...

A full-bridge converter supplying an RLE load is shown in figure. The firing angle of the bridge converter is 120º. The supply voltage $$${v_m}\left( t \right) = 200\pi \sin \left(...

A single phase induction motor draws $$12MW$$ power at $$0.6$$ lagging power. A capacitor is connected in parallel to the motor to improve the power factor of the combination of mo...

A synchronous generator is connected to an infinite bus with excitation voltage $${E_f} = 1.3\,pu.$$ The generator has a synchronous reactance of $$1.1$$ $$pu$$ and is delivering r...

A single load is supplied by a single voltage source. If the current flowing from the load to the source is $$10\angle - {150^0}$$ A and if the voltage at the load terminals is $$1...

The input voltage given to a converter is $${V_i} = 100\sqrt 2 \,\,\,\sin \,\,\,\left( {100\pi t} \right)\,\,V$$ The current drawn by the converter is $${i_i} = 10\sqrt 2 \,\,\,\si...

Consider two buses connected by an impedance of $$\left( {0 + j5} \right)\Omega .$$ The bus $$1$$ voltage is $$100$$$$\angle {30^ \circ }\,\,\,V,$$ and bus $$2$$ voltage is $$100\a...

When a line commutated converter operates in the inverter mode