Power Flow
GATE Electrical Engineering · Power Systems - Power Flow · 1998-2024
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →For the three-bus lossless power network shown in the figure, the voltage magnitudes at all the buses are equal to 1 per unit (pu), and the differences of the voltage phase angles...
A three phase, 50 Hz, 6 pole induction motor runs at 960 rpm. The stator copper loss, core loss, and the rotational loss of the motor can be neglected. The percentage efficiency of...
The power input to a $500 \mathrm{~V}, 50 \mathrm{~Hz}, 6$ pole, 3 phase induction motor running at 975 rpm is 40 kW . The stator losses are 1 kW . If the total friction and windag...
Consider two buses connected by an impedance of $$\left( {0 + j5} \right)\Omega .$$ The bus $$1$$ voltage is $$100$$$$\angle {30^ \circ }\,\,\,V,$$ and bus $$2$$ voltage is $$100\a...
A $$400$$ $$V,$$ $$50$$ $$Hz,$$ $$30$$ $$hp,$$ three-phase induction motor is drawing $$50$$ A current at $$0.8$$ power factor lagging. The stator and rotor copper losses are $$1.5...
A $$400$$ $$V,$$ $$50$$ $$kVA,$$ $$0.8$$ $$pf$$ leading delta connected, $$50$$ $$Hz$$ synchronous machine has a synchronous reactance of $$2$$ $$ohm$$ and negligible armature resi...
The power input to a 415 V, 50 Hz, 6 pole, 3-phase induction motor running at 975 rpm is 40 kW. The stator losses are 1kW and friction and windage losses total 2 kW. The efficiency...
A 3-phase squirrel cage induction motor has a full load efficiency of 0.8 and a maximum efficiency of 0.9. It is operated at a slip of 0.6 by applying a reduced voltage. The effici...