power
GATE Electrical Engineering · AC Circuits - Power Dissipation · 1992-2026
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →An electrical component has voltage drop $v = V_m \sin (\omega t)$, when the current through it is $i = I_m \sin (\omega t-\theta)$. What is the average power dissipated over a hal...
A continuous time periodic signal x(t) is $x(t) = 1 + 2 \cos 2\pi t + 2 \cos 4\pi t + 2 \cos 6\pi t$ If T is the period of x(t), then $\frac{1}{T} \int_{0}^{T} |x(t)|^2 dt = $ ____...
All the elements in the circuit are ideal. The power delivered by the 10 V source in watts is
The power supplied by the 25 V source in the figure shown below is ________ W.
A 220 V, 10 kW, 900 rpm separately excited DC motor has an armature resistance Rₐ = 0.02 Ω. When the motor operates at rated speed and with rated terminal voltage, the electromagne...
The voltage across the circuit in the figure, and the current through it, are given by the following expressions: v(t) = 5 - 10 cos(wt + 60°) V i(t) = 5 + X cos(wt) A where w = 100...
An incandescent lamp is marked 40W, 240V. If resistance at room temperature $$\left(26^\circ\mathrm C\right)\;\mathrm{is}\;120\mathrm\Omega$$ and temperature coefficient of resista...
How many 200 W/200 V incandescent lamps connected in series would consume the same total power as a single 100 W/200 V incandescent lamp?
A passive 2-port network is in a steady state.Compare to its input, the steady state output can never offer
Two incandescent light bulbs of $$40$$ $$W$$ and $$60$$ $$W$$ rating are connected in series across the mains. Then
When a resistor $$R$$ is connected to a current source, it consumes a power of $$18$$ $$W.$$ when the same $$R$$ is connected to a voltage source having the same magnitude as the c...
Neglecting all losses, the developed torque $$(T)$$ of $$d.c.$$ separately excited motor, operating under constant terminal voltage, is related to its output power $$(P)$$ as under