oscilloscope

A stationary closed Lissajous pattern on an oscilloscope has 3 horizontal tangencies and 2 vertical tangencies for a horizontal input with frequency 3 kHz. The frequency of the ver...

A stationary closed Lissajous pattern on an oscilloscope has $$3$$ horizontal tangencies and $$2$$ vertical tangencies for a horizontal input with frequency $$3$$ $$kHZ.$$ The freq...

The slope and level detector circuit in a CRO has a delay of 100 ns. The start-stop sweep generator has a response time of 50 ns. In order to display correctly, a delay line of

In an oscilloscope screen, linear sweep is applied at the

A dual trace oscilloscope is set to operate in the ALTernate. The control input of the multiplexer used in the y-circuit is fed with a signal having a frequency equal to

The simultaneous application of signals $$x(t)$$ and $$y(t)$$ to the horizontal and vertical plates, respectively, of an oscilloscope, produces a vertical figure-of-$$8$$ display....

Two in-phase, 50Hz sinusoidal waveform of unit amplitude are fed into channel-1. and channel-2 respectively of an oscilloscope, Assuming that the voltage scale, time scale and othe...

A certain oscilloscope with 4 c.m by 4 c.m screen has its own sweep output fed to its input. If the x and y sensitivities are same, the oscilloscope will display a.

A $$CRO$$ screen has ten divisions on the horizontal scale. If a voltage signal $$5$$ $$sin$$$$\left( {314t + {{45}^ \circ }} \right)$$ is examined with a line base setting of $$5$...