Inductor

A circuit with ideal elements is shown. Which one of the following options correctly identifies all the linear elements in the circuit?

An ideal sinusoidal voltage source $v(t) = 230\sqrt{2} \sin(2\pi \times 50t)$ V feeds an ideal inductor L through an ideal SCR with firing angle $\alpha = 0^{\circ}$. If $L = 100$...

The steady state capacitor current of a conventional DC-DC buck converter, working in CCM, is shown in one switching cycle. If the input voltage is 30 V, the value of the inductor...

In a DC-DC boost converter, the duty ratio is controlled to regulate the output voltage at 48 V. The input DC voltage is 24 V. The output power is 120 W. The switching frequency is...

The switch in the figure below was closed for a long time. It is opened at t = 0. The current in the inductor of 2 H for t ≥ 0, is

A coil of inductance $$10$$ $$H$$ resistance $$40\,\,\Omega $$ is connected as shown in Fig. After the switch $$S$$ has been in connection with point $$1$$ for a very long time, it...

A voltage wafeform $$v\left( t \right) = 12\,{t^2}$$ is applied across a $$1$$ $$H$$ inductor for $$t \ge 0,$$ with initial current through it being zero. The current through the i...