load impedance
GATE Electronics & Communication · Transmission Lines · 1987-2025
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A 50 Ω lossless transmission line is terminated with a load Z_L of (50 – j75) Ω. If the average incident power on the line is 10 mW, then the average power delivered to the load (i...
A transmission line of characteristic impedance 50 $$\Omega $$ is terminated in a load impedance $$Z_L$$. The VSWR of the line is measured as 5 and the first of the voltage naxima...
If a pure resistance load, when connected to a lossless 75-ohm line, produces a VSWR of 3 on the line, then the load impedance can only be 25 ohms.
A transmission line of pure resistive characteristic impedance is terminated with an unknown load. The measured value of VSWR on the line is equal to 2 and a voltage minimum point...