frequency spectrum
GATE Electronics & Communication · Sampling & DTFT · 1988-2017
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →The signal x(t) = $$\sin \,(14000\,\pi t)$$, where t is in seconds, is sampled at a rate of 9000 samples per second. The sampled signal is the input to an ideal lowpass filter with...
The signal $$\cos \left( {10\pi t + {\pi \over 4}} \right)$$ is ideally sampled at a sampling frequency of 15 Hz. The sampled signal is passed through a filter with impulse respons...
A 1 kHz sinusoidal signal is ideally sampled at 1500 samples /sec and the sampled signal is passed through an ideal low-pass filter with cut-off frequency 800 Hz. The output signal...
A low pass signal m(t) band-limited to B Hz is sampled by a periodic rectangular pulse train, $${p_\tau }(t)$$ of period $${T_s}$$ = 1/(3B) sec. Assuming natural sampling and that...
A signal containing only two frequency components (3 kHz and 6 kHz) is sampled at the rate of 8 kHz, and then passed through a low pass filter with a cutoff frequency of 8 kHz. The...