Skip to content
Early access — you're among the first to try PYQLabs. Share feedback

Materials & Costing

GATE Civil Engineering · 23 questions across 15 years (1990-2025) · 38% recurrence rate

Recurrence sparkline

1990–2025
199020082025

Difficulty mix

easy 83%
med 17%

Question types

MCQ14
STMT5
NAT2
MSQ1
MTF1

All 23 questions on Materials & Costing

2025 PYQ

In the context of construction materials, which of the following statements is/are CORRECT?

Med✓
2025 PYQ

An electricity utility company charges ₹ 7 per kWh (kilo watt-hour). If a 40-watt desk light is left on for 10 hours each night for 180 days, what would be the cost of energy consumption? If the desk light is on for 2 mo...

Easy✓
2025 PYQ

Identify the FALSE statement from the following options:

Easy✓
2024 PYQ

Consider the statements P and Q. P: Client’s Preliminary Estimate is used for budgeting costs toward the end of planning and design phase. Q: Client’s Detailed Estimate is used for controlling costs during the execution...

Easy✓
2024 PYQ

The initial cost of an equipment is Rs. 1,00,000. Its salvage value at the end of accounting life of 5 years is Rs. 10,000. The difference in depreciation (in Rs.) computed using ‘double-declining balance method’ and ‘st...

Med
2023 PYQ

In cement concrete mix design, with the increase in water-cement ratio, which one of the following statements is TRUE?

Easy✓
2022 PYQ

Which of the following equations is correct for the Pozzolanic reaction?

Easy✓
2022 PYQ

Match all the possible combinations between Column X (Cement compounds) and Column Y (Cement properties) : Column X Column Y (i) $${C_3}S$$ (P) Early age strength (ii) $${C_2}S$$ (Q) Later age strength (iii) $${C_3}A$$ (...

Easy✓
2017 PYQ

Consider the following statements: P. Walls of one brick thick are measured in square meters. Q. Walls of one brick thick are measured in cubic meters. R. No deduction in the brickwork quantity is made for openings in wa...

Med✓
2016 PYQ

As per Indian standards for bricks, minimum acceptable compressive strength of any class of burnt clay bricks in dry state is

Easy✓
2016 PYQ

The compound which is largely responsible for initial setting and early strength gain of Ordinary Portland Cement is

Easy✓
2016 PYQ

Bull's trench kiln is used in the manufacturing of

Easy✓
2015 PYQ

The composition of an air-entrained concrete is given below: Water : 184 kg /m 3 Ordinary Portland Cement(OPC) : 368 kg /m 3 Sand : 606 kg /m 3 Coarse aggregate : 1155 kg /m 3 Assume the specific gravity of OPC, sand and...

Med
2015 PYQ

Workability of concrete can be measured using slump, compaction factor and Vee bee time. Consider the following statements for workability of concrete: (i) As the slump increases, the Vebe time increases (ii) As the slum...

Easy✓
2015 PYQ

Consider the following statements for air-entrained concrete: (i) Air-entrainment reduces the water demand for a given level of workability (ii) Use of air-entrained concrete is required in environments where cyclic free...

Easy✓
2014 PYQ

The target mean strength f cm for concrete mix design obtained from the characteristic strength (f ck ) and standard deviation $$\sigma$$, as defined in IS:456-2000, is

Easy✓
2013 PYQ

Maximum possible value of compaction factor for fresh (green) concrete is

Easy✓
2007 PYQ

Consider the following statements: 1. The compressive strength of concrete decreases with increase in water-cement ratio of the concrete mix. 2. Water is added to the concrete mix for hydration of cement and workability....

Easy✓
1997 PYQ

The cylinder strength of the concrete is less than the cube strength because of

Easy✓
1995 PYQ

Workability of concrete is influenced most by its

Easy✓
1994 PYQ

Grading of aggregate in a concrete mix is necessary to achieve

Easy✓
1991 PYQ

Setting time of cement sample is tested by

Easy✓
1990 PYQ

Tensile strength of cement mortar is usually found by:

Easy✓