Influence Lines
GATE Civil Engineering · 6 questions across 4 years (1994-2023) · 10% recurrence rate
Recurrence sparkline
1994–2023Difficulty mix
Question types
All 6 questions on Influence Lines
Muller-Breslau principle is used in analysis of structures for ________.
A homogeneous, simply supported prismatic beam of width $$B,$$ depth $$D$$ and span $$L$$ is subjected to a concentrated load of magnitude $$P.$$ The load can be placed anywhere along the span of the beam. The maximum fl...
A beams $$PQRS$$ is $$18$$ $$m$$ long and is simply supported at points $$Q$$ and $$R$$ $$10$$ $$m$$ apart. overhangs $$PQ$$ and $$RS$$ are $$3$$ $$m$$ and $$5$$ $$m$$ respectively. A train of two point loads of $$150$$...
Muller Breslau Principle in structural analysis is used for
A beams $$PQRS$$ is $$18$$ $$m$$ long and is simply supported at points $$Q$$ and $$R$$ $$10$$ $$m$$ apart. overhangs $$PQ$$ and $$RS$$ are $$3$$ $$m$$ and $$5$$ $$m$$ respectively. A train of two point loads of $$150$$...
Influence line for redundant structures can be obtained by