Connections

A circular tube of thickness 10 mm and diameter 250 mm is welded to a flat plate using 5 mm fillet weld along the circumference. Assume Fe410 steel and shop welding. As per IS 800:2007, the torque that can be resisted by...

Rivets and bolts subjected to both shear stress $$\left( {{\tau _{vf}},\,cal} \right)$$ and axial tensile stress $$\left( {{\sigma _{tf,cal}}} \right)$$ shall be so proportioned that the stresses do not exceed the respec...

A truss tie consisting of $$2$$ $$ISA$$ $$75 \times 75 \times 8\,\,mm$$ carries a pull of $$150$$ $$kN.$$ At ends the two angles are connected, one each on either side of a $$10$$ $$mm$$ thick gusset plate, by $$18$$ $$m...

Maximum size of a fillet weld for a plate of square edge is