Skip to content
Early access — you're among the first to try PYQLabs. Share feedback
Concept drill

uniformly distributed load

GATE Civil Engineering · Structural Analysis - Arches · 1992-2025

16
PYQs
100%
keyed
0
elite explanations
11
years appeared

Study anchor

Source-book anchor pending for this concept.

Practice action

Start latest PYQ

PYQs in this concept

All concepts →
2025 Q52

A steel beam supported by three parallel pin-jointed steel rods is shown in the figure. The moment of inertia of the beam is 8 x 10^7 mm^4. Take modulus of elasticity of steel as 2...

hardanswer key
2024 Q39

The beam shown in the figure is subjected to a uniformly distributed downward load of intensity q between supports A and B. Considering the upward reactions as positive, the suppor...

mediumanswer key
2024 Q49

For the 6 m long horizontal cantilever beam PQR shown in the figure, Q is the mid-point. Segment PQ of the beam has flexural rigidity EI = 2 × 10$^5$ kN. m$^2$ whereas the segment...

hardanswer key
2023 Q16

When a simply-supported elastic beam of span L and flexural rigidity EI (E is the modulus of elasticity and I is the moment of inertia of the section) is loaded with a uniformly di...

hardanswer key
2023 Q54

For the frame shown in the figure (not to scale), all members (AB, BC, CD, GB, and CH) have the same length, L and flexural rigidity, EI. The joints at B and C are rigid joints, an...

hardanswer key
2021 Q29

A frame EFG is shown in the figure. All members are prismatic and have equal flexural rigidity. The member FG carries a uniformly distributed load w per unit length. Axial deformat...

mediumanswer key
2020 Q19

A planar elastic structure is subjected to uniformly distributed load, as shown in the figure (not drawn to the scale) Neglecting self-weight, the maximum bending moment generated...

hardanswer key
2018 Q5

A simply supported beam is subjected to a uniformly distributed load. Which one of the following statements is true?

mediumanswer key
2018 Q7

The figure shows a two-hinged parabolic arch of span L subjected to a uniformly distributed load of intensity q per unit length. The maximum bending moment in the arch is equal to

hardanswer key
2012 PYQ

A simply supported beam is subjected to a uniformly distributed load of intensity $$w$$ per unit length. On half of the span from one end. The length of the span and the flexural s...

mediumanswer key
2007 PYQ

A two span continuous beam having equal spans each of length $$L$$ is subjected to a uniformly distributed load $$\omega $$ per unit length. The beam has constant flexural rigidity...

easyanswer key
2007 PYQ

A two span continuous beam having equal spans each of length $$L$$ is subjected to a uniformly distributed load $$\omega $$ per unit length. The beam has constant flexural rigidity...

mediumanswer key
2007 PYQ

A two span continuous beam having equal spans each of length $$L$$ is subjected to a uniformly distributed load $$w$$ per unit length. The beam has constant flexural rigidity. The...

mediumanswer key
1995 PYQ

A propped cantilever beam of span $$L,$$ is loaded with uniformly distributed load of intensity $$w/unit$$ length, all through the span. Bending moment at the fixed end is

easyanswer key
1994 PYQ

A cantilever beam of span $$l$$ subjected to a uniformly distributed load $$'w'$$ per unit length resting on a rigid prop at the tip of cantilever. The magnitude of the reaction of...

easyanswer key
1992 PYQ

A cantilever beam of span, $$'L'$$ is subjected to a downward load of $$800$$ $$kN$$ uniformly distributed over its length and a concentrated upward load $$P$$ at its free end. For...

easyanswer key