shear force
GATE Civil Engineering · Structural Analysis - Shear Force · 1994-2025
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →Consider the frame shown in the figure under the loading of 100 kN.m couples at the joints B and G. Considering only the effects of flexural deformations, which of the following st...
Consider the beam ACDEB given in the figure. Which of the following statements is/are correct:
In the frame shown in the figure (not to scale), all four members (AB, BC, CD, and AD) have the same length and same constant flexural rigidity. All the joints A, B, C, and D are r...
Consider the beam shown in the figure (not to scale), on a hinge support at end A and a roller support at end B. The beam has a constant flexural rigidity, and is subjected to the...
A semi-circular bar of radius R m, in a vertical plane, is fixed at the end G, as shown in the figure. A horizontal load of magnitude P kN is applied at the end H. The magnitude of...
A propped cantilever beam EF is subjected to a unit moving load as shown in the figure (not to scale). The sign convention for positive shear force at the left and right sides of a...
The cross-section of a built-up wooden beam as shown in the figure (not drawn to scale) is subjected to a vertical shear force of 8 kN. The beam is symmetrical about the neutral ax...
A long uniformly distributed load of 10 kN/m and a concentrated load of 60 kN are moving together on the beam ABCD shown in the figure (not drawn to scale). The relative positions...
A simply supported beam is subjected to a uniformly distributed load. Which one of the following statements is true?
Consider the three prismatic beams with the clamped supports P, Q, and R as shown in the figures. Given that the modulus of elasticity, E is 2.5×10^4 MPa; and the moment of inertia...
A simply supported beam is subjected to a uniformly distributed load. Which one of the following statements is true?
The following statements are related to bending of beams: $${\rm I}.$$ The slope of the bending moment diagram is equal to the shear force. $${\rm II}.$$ The slope of the shear for...
If a beam of rectangular cross-section is subjected to a vertical shear force $$V,$$ the shear force carried by the upper one-third of the cross-section is
If the Shear Force at a section of a beam under bending is equal to zero then the Bending Moment at the section is
A cantilever beam curved in plan and subjected to lateral loads will develop at any section