Concept drill
reinforcement
GATE Civil Engineering · Detailing & Codes · 2011-2026
4
PYQs
100%
keyed
0
elite explanations
4
years appeared
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →2026 Q29
The required centre-to-centre spacing of 10 mm diameter bars is 150 mm to resist the design moment in a concrete slab. Instead of 10 mm diameter bars, if 12 mm diameter bars of the...
mediumanswer key
2025 Q15
As per IS 456:2000 provisions for two-way slabs with continuous edges, the longitudinal steel reinforcement to be provided in the edge strip is based on
mediumanswer key
2024 Q52
A slab panel with an effective depth of 250 mm is reinforced with 0.2% main reinforcement using 8 mm diameter steel bars. The uniform center-to-center spacing (in mm) at which the...
mediumanswer key
2011 PYQ
The cross-section of a thermo-mechanically treated (TMT) reinforcing bar has
easyanswer key