Skip to content
Early access — you're among the first to try PYQLabs. Share feedback
Concept drill

porosity

GATE Civil Engineering · Hydrology and Water Resources Engineering - Groundwater Flow · 1994-2026

10
PYQs
60%
keyed
0
elite explanations
10
years appeared

Study anchor

Source-book anchor pending for this concept.

Practice action

Start latest PYQ

PYQs in this concept

All concepts →
2026 Q21

A rapid sand filter bed of depth 0.8 m has 40% porosity during service cycle. It is recommended that during backwash operation, the expanded filter bed should have 70% porosity. Th...

mediumanswer key
2024 PYQ

The in-situ percentage of voids of a sand deposit is 50%. The maximum and minimum densities of sand determined from the laboratory tests are 1.8 g/cm 3 and 1.3 g/cm 3 , respectivel...

mediumbasic explanation
2021 Q24

Two reservoirs are connected through a homogeneous and isotropic aquifer having hydraulic conductivity (K) of 25 m/day and effective porosity (η) of 0.3 as shown in the figure (not...

mediumanswer key
2019 Q47

A confined aquifer of 15 m constant thickness is sandwiched between two aquicludes as shown in the figure (not drawn to scale). The heads indicated by two piezometers P and Q are 5...

mediumanswer key
2016 PYQ

The porosity (n) and the degree of saturation (S) of a soil sample are 0.7 and 40%, respectively. In a 100 $$m^3$$ volume of the soil, the volume (expressed in $$m^3$$) of air is _...

easy
2014 PYQ

A certain soil has the following properties: G s = 2.71, n = 40% and w = 20%. The degree of saturation of the soil (rounded off to the nearest percent) is _________

easy
2000 PYQ

A soil sample has a void ratio of 0.5 and its porosity will be closed to

easyanswer key
1997 PYQ

If the porosity of a soil sample is 20%, the void ratio is

easyanswer key
1996 PYQ

Which one of the following relations is not correct?

easyanswer key
1994 PYQ

The void ratio of a soil sample is 1. The corresponding porosity of the sample is _______.

easy