plate load test
GATE Civil Engineering · Foundations · 2018-2025
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A designer used plate load test to obtain the value of the bearing capacity factor N$\gamma$. A circular plate of 1 m diameter was placed on the surface of a dry sand layer extendi...
A designer used plate load test to obtain the value of the bearing capacity factor $\mathrm{N}_\gamma$. A circular plate of 1 m diameter was placed on the surface of a dry sand lay...
A square footing of size 2.5 m × 2.5 m is placed 1.0 m below the ground surface on a cohesionless homogeneous soil stratum. Considering that the groundwater table is located at the...
A square footing of size 2.5 m × 2.5 m is placed 1.0 m below the ground surface on a cohesionless homogeneous soil stratum. Considering that the groundwater table is located at the...
The plate load test was conducted on a clayey strata by using a plate of 0.3 m × 0.3 m dimensions, and the ultimate load per unit area for the plate was found to be 180 kPa. The ul...