modulus of elasticity
GATE Civil Engineering · Structural Analysis - Indeterminate Structures · 1990-2025
Study anchor
Source-book anchor pending for this concept.
Practice action
Start latest PYQPYQs in this concept
All concepts →A steel beam supported by three parallel pin-jointed steel rods is shown in the figure. The moment of inertia of the beam is 8 x 10^7 mm^4. Take modulus of elasticity of steel as 2...
A rectangular cross-section of a reinforced concrete beam is shown in the figure. The diameter of each reinforcing bar is 16 mm. The values of modulus of elasticity of concrete and...
When a specimen of M25 concrete is loaded to a stress level of 12.5 MPa, a strain of 500×10-6 is recorded. If this load is allowed to stand for a long time, the strain increases to...
For $$M25$$ concrete with creep coefficient of $$1.5,$$ the long-term static modulus of elasticity (expressed in $$MPa$$) as per provisions of $$IS:$$ $$456-2000$$ is _____________...
The modulus of elasticity, E = 5000$$\sqrt{{\mathrm f}_\mathrm{ck}}$$ where f ck is the characteristic compressive strength of concrete, specified in IS:456-2000 is based on
In a reinforced concrete section, the stress at the extreme fibre in compression is $$5.80$$ $$MPa.$$ The depth of neutral axis in the section is $$58$$ $$mm$$ and the grade of con...
Consider the following statements: I. Modulus of elasticity concrete increases with increase in compressive strength of concrete. II. Brittleness of concrete increases with decreas...
Modulus of elasticity of M25 grade concrete in MPa is
The modulus of elasticity of concrete mix M25 is