Skip to content
Early access — you're among the first to try PYQLabs. Share feedback
Concept drill

irrigation

GATE Civil Engineering · Irrigation Engineering - Cross Drainage Works · 2000-2026

18
PYQs
89%
keyed
0
elite explanations
12
years appeared

Study anchor

Source-book anchor pending for this concept.

Practice action

Start latest PYQ

PYQs in this concept

All concepts →
2026 Q17

An irrigation canal is to be designed to deliver 10 cumec to meet the peak demand of 7500 hectare of cropped area. The estimated canal losses are 50 % of the head discharge. The du...

mediumanswer key
2025 PYQ

Pick one or more CORRECT statement(s) from the choices given below, in the context of upstream and downstream cut-offs provided below the concrete apron of weirs/barrages construct...

easyanswer keybasic explanation
2025 PYQ

Lacey's regime equations, followed in India for making scour calculations while designing hydraulic structures across alluvial channels, are given below. Regarding these equations,...

mediumanswer keybasic explanation
2023 Q20

Identify the cross-drainage work in the figure.

mediumanswer key
2023 Q33

A canal supplies water to an area growing wheat over 100 hectares. The duration between the first and last watering is 120 days, and the total depth of water required by the crop i...

mediumanswer key
2023 PYQ

A canal supplies water to an area growing wheat over 100 hectares. The duration between the first and last watering is 120 days, and the total depth of water required by the crop i...

mediumbasic explanation
2022 Q34

During a particular stage of the growth of a crop, the consumptive use of water is 2.8 mm/day. The amount of water available in the soil is 50 % of the maximum depth of available w...

mediumanswer key
2022 Q57

A pump with an efficiency of 80% is used to draw groundwater from a well for irrigating a flat field of area 108 hectares. The base period and delta for paddy crop on this field ar...

hardanswer key
2021 Q50

A reservoir with a live storage of 300 million cubic metre irrigates 40000 hectares (1 hectare = 10⁴ m²) of a crop with two fillings of the reservoir. If the base period of the cro...

mediumanswer key
2019 Q24

The command area of a canal grows only one crop, i.e., wheat. The base period of wheat is 120 days and its total water requirement, Δ, is 40 cm. If the canal discharge is 2 m³/s, t...

mediumanswer key
2018 Q24

The intensity of irrigation for the Kharif season is 50% for an irrigation project with culturable command area of 50,000 hectares. The duty for the Kharif season is 1000 hectare/c...

mediumanswer key
2018 Q30

Group I contains three broad classes of irrigation supply canal outlets. Group II presents hydraulic performance attributes. Group I P. Non-modular outlet Q. Semi-modular outlet R....

mediumanswer key
2017 PYQ

The culturable command area of a canal is 10,000 ha. The area grows only two crops-rice in the Kharif season and wheat in the Rabi season. The design discharge of the canal is base...

medium
2015 PYQ

The two columns below show some parameters and their possible values. Parameters Value P-Gross Command Area I-100 hectares/cumec Q-Permanent Wilting Point II-6℃ R-Duty of canal wat...

easyanswer key
2008 PYQ

An outlet irrigates an area of 20 ha. The discharge (lit/sec) required at this outlet to meet the evapotranspiration requirement of 20mm occurring uniformly in 20 days neglecting o...

easyanswer key
2007 PYQ

The culturable command area for a distributary channel is 20,000 hectares. Wheat grown in the entire area and the intensity of irrigation is 50%. The kor period for wheat is 30 day...

mediumanswer key
2000 PYQ

If duty (D) is 1428 hectares/cumec and base period (B) is 120 days for an irrigated crop, then delta ($$\Delta$$) in meters is given by

easyanswer key
2000 PYQ

A tube well having a capacity of 4 $$m^3 /hour$$ operates for 20 hours each day during the irrigation season. How much area can be commanded if the irrigation interval is 20 days a...

easyanswer key