beam design

Consider a reinforced concrete beam section of 350 mm width and 600 mm depth. The beam is reinforced with the tension steel of 800 mm² area at an effective cover of 40 mm. Consider...

A reinforced concrete beam with rectangular cross section (width = 300 mm, effective depth = 580 mm) is made of M30 grade concrete. It has 1% longitudinal tension reinforcement of...

The singly reinforced concrete beam section shown in the figure (not drawn to the scale) is made of M25 grade concrete and Fe500 grade reinforcing steel. The total cross-sectional...

A singly-reinforced rectangular concrete beam of width 300 mm and effective depth 400 mm is to be designed using M25 grade concrete and Fe500 grade reinforcing steel. For the beam...

For a beam of cross-section, width $$= 230$$ $$mm$$ and effective depth $$= 500$$ $$mm,$$ the number of rebars of $$12$$ $$mm$$ diameter required to satisfy minimum tension reinfor...

The minimum area of tension reinforcement in a beam shall be greater than

A simply supported beam of a beam and slab system, rests on a support of width $$450$$ $$mm.$$ The clear span of the beam is $$10.0$$ $$m.$$ The thickness of the slab is $$120$$ $$...