GATE 2003 Civil Engineering
19 questions across 1 session
The effective length of a column in a reinforced concrete building frame, as per $$IS:$$ $$456$$-$$2000,$$ is independent of the
A concrete column carries an axial load of $$450$$ $$kN$$ and a bending moment of $$60$$ $$kN$$-$$m$$ at its base. An isolated footing of size $$2m \times 3m$$ side along the plane...
A reinforced concrete beam, size $$200$$ $$mm$$ wide and $$300$$ $$mm$$ deep overall is simply supported over a span of $$3$$ $$m.$$ It is subjected to two point loads $$P$$ of equ...
Group-$${\rm I}$$ contains some elements in design of a simply supported plate girder and Group-$${\rm II}$$ gives some qualitative locations on the girder. Match the items of two...
A truss tie consisting of $$2$$ $$ISA$$ $$75 \times 75 \times 8\,\,mm$$ carries a pull of $$150$$ $$kN.$$ At ends the two angles are connected, one each on either side of a $$10$$...
A beams $$PQRS$$ is $$18$$ $$m$$ long and is simply supported at points $$Q$$ and $$R$$ $$10$$ $$m$$ apart. overhangs $$PQ$$ and $$RS$$ are $$3$$ $$m$$ and $$5$$ $$m$$ respectively...
Maximum strains in an extreme fibre in concrete and in the tension reinforcement (Fe-$$415$$ grade and $${E_s} = 200\,\,kN/m{m^2}$$) in a balanced section at limit state of flexure...
A reinforced concrete beam, size $$200$$ $$mm$$ wide and $$300$$ $$mm$$ deep overall is simply supported over a span of $$3$$ $$m.$$ It is subjected to two point loads $$P$$ of equ...
In the design of lacing system for a, built-up steel column, the maximum allowable slenderness ratio of lacing bar is
The vector field $$\,F = x\widehat i - y\widehat j\,\,$$ (where $$\widehat i$$ and $$\widehat j$$ are unit vectors) is
Given matrix $$\left[ A \right] = \left[ {\matrix{ 4 & 2 & 1 & 3 \cr 6 & 3 & 4 & 7 \cr 2 & 1 & 0 & 1 \cr } } \right],$$ the rank of the matrix is
If $$L$$ denotes the laplace transform of a function, $$L\left\{ {\sin \,\,at} \right\}$$ will be equal to
A box contains $$10$$ screws, $$3$$ of which are defective. Two screws are drawn at random with replacement. The probability that none of the two screws is defective will be
A truss tie consisting of $$2$$ $$ISA$$ $$75 \times 75 \times 8\,\,mm$$ carries a pull of $$150$$ $$kN.$$ At ends the two angles are connected, one each on either side of a $$10$$...
Muller Breslau Principle in structural analysis is used for
A beams $$PQRS$$ is $$18$$ $$m$$ long and is simply supported at points $$Q$$ and $$R$$ $$10$$ $$m$$ apart. overhangs $$PQ$$ and $$RS$$ are $$3$$ $$m$$ and $$5$$ $$m$$ respectively...
A beams $$PQRS$$ is $$18$$ $$m$$ long and is simply supported at points $$Q$$ and $$R$$ $$10$$ $$m$$ apart. overhangs $$PQ$$ and $$RS$$ are $$3$$ $$m$$ and $$5$$ $$m$$ respectively...
A long structural column (length $$-L$$) with both ends hinged is acted upon by an axial compressive load $$P.$$ The differential equation governing the bending of column is given...
For linear elastic systems, the type of displacement function for the strain energy is