GATE 1992 Civil Engineering
11 questions across 1 session
A uniformly distributed load intensity, $$w$$ acting on a simply supported prestressed concrete beam of span $$L,$$ producing a bending moment $$M,$$ at mid-span is to be balanced...
A floor slab of thickness, $$t$$ is cast monolithically transverse to a rectangular continuous beam of span $$L$$ and width $$B.$$ If the distance between two consecutive points of...
A reinforced concrete member is subjected to combined action of compressive axial force and bending moment. If $${\varepsilon _{\min }}$$ is the least compressive strain in the mem...
If $$\phi \, = \,$$ nominal diameter of reinforcing bar, $${f_s}\, = $$ compressive stress in the bar and $${f_{bd}}\, = $$ design bond stress of concrete, the anchorage length, $$...
The loss of prestress due to elastic shortening of concrete is least in
Shear stress develops on a fluid element, if the fluid
The axial load carrying capacity of a long column of given material. Cross-sectional area, $$A$$ and length, $$L$$ is governed by
A cantilever beam of span, $$'L'$$ is subjected to a downward load of $$800$$ $$kN$$ uniformly distributed over its length and a concentrated upward load $$P$$ at its free end. For...
The maximum bending stress induced in a steel wire of modulus of elasticity $$200$$ $$kN/m{m^2}$$ and diameter $$1$$ $$mm$$ when wound on a drum of diameter $$1$$ $$m$$ is approxim...
The kern area (core) of a solid circular section column of diameter, $$D$$ is a concentric circle of diameter, $$'d'$$ is equal to
In a real beam, at an end, the boundary condition of zero slope and zero vertical displacement exists. In the corresponding conjugate beam, the boundary conditions at this end will...